【2024 】分享老照片修復數位工具 8 個及製作照片回憶錄數位工具 3 個

3D printing orthopedic scoliosis braces | 合法醫療器材資訊網

3D printing orthopedic scoliosis braces

由DFRedaelli著作·2020·被引用7次—Currently,themajorlimitingfactorsforproducinglargeorthoticdevicesby3DPareprocessingtimesandhighequipmentcosts(inparticular, ...

 3D printing orthopedic scoliosis braces

3.1 Preliminary material screening

Common materials used in the thermoforming of braces include polyethylene (PE), polypropylene (PP), and polyethylene foam.

Among the materials listed in Table 1, polylactic acid (PLA) and polyethylene terephthalate glycol-modified (PETG) show the best combination of mechanical properties, processing parameters and low purchase cost; in particular, PETG presents mechanical properties more appropriate for the application (e.g., toughness and hydrophobicity). Therefore, a commercial 1.75-mm diameter PETG filament (Zhuhai Sunlu Industrial Co., China) was selected for the realization of the 3D printed back brace.

Table 1 Preliminary comparison and assessment of typical materials available for FDM 3D printers, using data from the database CES EduPack (Granta Design, UK) and filament datasheets.3.2 Reverse engineering of the traditional scoliosis brace

The initial 3D scan of the brace took 1 min. The mesh was repaired, and the model was cleaned ...

閱讀更多

3d printed back brace bespoke back brace custom back brace Exos armor custom back brace for scoliosis exos armor nissei血壓計ptt philips imaging systems philips ecg monitor Philips ultrasound 體積描記 法 SONON Healcerion Ultrasound scanner
Exos Armor | 合法醫療器材資訊網
Read More
3D printing orthopedic scoliosis braces | 合法醫療器材資訊網
由 DF Redaelli 著作 · 2020 · 被引用 7 次 — Currently, the major limiting factors for producing large orthotic devices by 3DP are processing times and high equipment costs (in particular, ... Read More
Treating Scoliosis with Exos Armor | 合法醫療器材資訊網
2021年1月14日 — A startup called Exos plans to modernize and personalize the back brace by 3D printing theirs using 3D scans of the patient. Read More
3D | 合法醫療器材資訊網
由 Y Zhang 著作 · 2020 · 被引用 1 次 — 9 The reported failure rate (progression of AIS warranting surgery) varied widely, ranging from 0% to 79% after bracing.6 8–11 Many factors might have an impact ... Read More
(PDF) 3D printing orthopedic scoliosis braces | 合法醫療器材資訊網
2021年5月18日 — Moreover, a cost analysis was carried out for the specific application. The thermoformed brace of a volunteer patient affected by scoliosis was ... Read More
3D printing orthopedic scoliosis braces | 合法醫療器材資訊網
2020年10月15日 — producing orthopedic scoliosis braces by 3D printing, comparing performance and costs with classical thermoforming proce-. Read More
Custom 3D printed braces for scoliosis treatment | 合法醫療器材資訊網
2015年9月8日 — Last June the Rock Hill, South Carolina-based company, 3D Systems, unveiled their bespoke back braces which were entirely 3D printed and used to ... Read More
3D printed braces | 合法醫療器材資訊網
2016年6月17日 — The benefits of 3D printing the brace are also notable: the technology is cost and materially efficient, even once printed the braces can be ... Read More
3D printing orthopedic scoliosis braces | 合法醫療器材資訊網
由 DF Redaelli 著作 · 2020 · 被引用 7 次 — Moreover, a cost analysis was carried out for the specific application. The thermoformed brace of a volunteer patient affected by scoliosis was ... Read More
Scolioalign™ 3d Brace | 合法醫療器材資訊網
Well, unlike so-called “hard” braces which attempt to halt the progression of scoliosis by essentially immobilizing the patient, the ScolioAlign™ 3D Brace works ... Read More
相關資訊整理

【波士頓矯形裝具 (未滅菌)】許可證字號:衛署醫器輸壹字第003925號

器材品名:波士頓矯形裝具(未滅菌)許可證字號:衛署醫器輸壹字第003925號註銷狀態:已註銷註銷日期:2012/11/16註銷理由:許可證...

【”信迪思”延展式肋骨支撐架】許可證字號:衛署醫器輸字第018701號

器材品名:”信迪思”延展式肋骨支撐架許可證字號:衛署醫器輸字第018701號註銷狀態:註銷日期:註銷理由:有效日期:2022/12/25發證...