High Load Chemical Anchor taiwan supplier factory | 合法醫療器材資訊網

FastFix-itprovidechemicalanchorswithhighstability&loadcapacity.FastFixchemicalanchorcanworkinwidetemperaturerangewithlowwastag.

1.DRILL Drill hole to the diameter and depth required. The diameter must be in accordance with anchor size. 2.CLEAN The drill hole must be cleaned with air blower, starting from the bottom of the hole. The drill hole must be thoroughly cleaned with steel brush. After brush, to use air blower to clean the drill hole again. 3.INJECT Inject the adhesive into the hole, starting from the bottom, while slowly drawing back the static mixer.

In any case avoid entrapping air. For deep holes extension tubing can be used. 4.INSERT Insert the anchor with a rotary motion into the filled drill hole. Some adhesive must come out of the hole. 5.ANCHOR During the resin hardening time the anchor must not be moved or loaded.

​