Evaluation of five CADCAM materials by microstructural ... | 合法醫療器材資訊網

由NSonmez著作·2018·被引用78次—LavaUltimatehassuperiortranslucencyincomparisontoVITAEnamicandglass-matrix...X-raydiffractionpatternsofVITAMarkII.

Five monolithic high translucent CAD/CAM block materials (A2 HT and 2 M2 HT shades) were investigated in the study; a feldspathic ceramic VIT: VITA Mark II (VITA Zahnfabrik, Bad Säckingen, Germany), a leucite based ceramic EMP: IPS Empress CAD (Ivoclar Vivadent, Schaan Liechtenstein), a lithium disilicate ceramic MAX: IPS e.max CAD (Ivoclar Vivadent, Schaan, Liechtenstein), a nanoceramic resin ULT: Lava Ultimate (3 M ESPE, Neus, MN, USA), and a hybrid ceramic ENA: VITA Enamic (VITA Zahnfabrik, Bad Säckingen, Germany). Power analysis using G*Power statistical software (G*Power Ver. 3.0.10, Franz Faul, Universität Kiel, Germany) was performed to determine the sample size. A total of 10 samples per group were set considering Power: 0.80, α:0.05, effect size: 2.4 and SD: 20 for mechanical tests. The codes used for the materials and their classifications are displayed in Table 1.

...

Comparison of mechanical properties of three ... | 合法醫療器材資訊網

由 BTW Leung 著作 · 2015 · 被引用 75 次 — max CAD, Vitablocs Mark II, and Vita Enamic, with an experimental FGC. Material and methods: Each type of ceramic block was sectioned into beams (n=15) of ... Read More

-Ceramic blocs: Vita Mark II, Procad | 合法醫療器材資訊網

It was difficult to make direct comparison of the strength results with those from different literatures, because of the variety in test methods, specimen ... Read More

Comparison of mechanical properties of three machinable ... | 合法醫療器材資訊網

The Weibull plot revealed that IPS e.max CAD>Vita Enamic>FGC>Vitablocs Mark II for the characteristic strength at both 63.2% (η) and 10.0% (B10). Read More

Side | 合法醫療器材資訊網

VITABLOCS Mark II, VITA CAD-Temp MultiColor Blocks, VITABLOCS RealLife Ceramic Blocks, Vita CAD-Waxx Blocks, VITA ENAMIC Hybrid Ceramic Block. Read More

Materials for chairside CADCAM–produced restorations | 合法醫療器材資訊網

由 R Giordano 著作 · 2006 · 被引用 1090 次 — Note the absence of porosity in the Vitablocs Mark II block. ... If the surface is polished or glazed and if the microstructure is fine-grained, ... Read More

牙科陶瓷材料基礎介紹（二）— 陶瓷分類 | 合法醫療器材資訊網

2017年3月12日 — 透光性很好，可用氫氟酸酸蝕，但是強度較弱。市面上的CAD/CAM 瓷塊有Vita 公司出的Mark II、TriLuxe、TriLuxe Forte、RealLife 等。圖 ... Read More

A Review of Chairside CADCAM Restorative Materials | 合法醫療器材資訊網

由 DJ Fasbinder 著作 — grained feldspathic porcelain (Vitablocs Mark II, Vita Zahnfabrik; ... Adhesive ceramic materials may be either hand-polished or. Read More

Gold standard for chairside restorations | 合法醫療器材資訊網

for a long time, Vita Mark II was considered the sole standard for processing restorations onsite. ... Empress® CAD or as IPS Empress CAD Multi blocks (185. Read More

Evaluation of five CADCAM materials by microstructural ... | 合法醫療器材資訊網

由 N Sonmez 著作 · 2018 · 被引用 78 次 — Lava Ultimate has superior translucency in comparison to VITA Enamic and glass-matrix ... X-ray diffraction patterns of VITA Mark II. Read More

Comparative characterization of a novel cad | 合法醫療器材資訊網

由 A Albero 著作 · 2015 · 被引用 131 次 — A polymer-infiltrated ceramic (Vita Enamic), a nano-ceramic resin (Lava Ultimate), a feldspathic ceramic (Mark II), a lithium disilicate ceramic (IPS-e max ... Read More

相關資訊整理