Air Detectors simulate air removal of porous load autoclaves | 合法醫療器材資訊網

2015年1月14日 — In its simplest form an air detector is a temperature probe located in a tube attached to the drain line or chamber of the autoclave. A pressure set ... Read More

Air Detectors are used to simulate the air removal of porous load autoclaves. These 'in process' monitoring devices are detailed in HTM 2010 and EN 285, and​ ... Read More

leakage rate just beneath 10 mbar/min. tion of the air detector for a steam steriliser. Hence the first of the two aforementioned tine operations. Read More

2015年2月11日 — An Autoclaves Air Detector is set up to detect air removal problems and alarm/​abort the cycle before the load fails, the air detector becomes an in- ... Read More

2019年10月14日 — In autoclaves where prevacuum pulses are employed for air removal, the air in the chamber is replaced with saturated steam through a series of ... Read More

autoclave chamber (as measured by the controlling pressure sensor) it will be much more difficult to remove all the residual air from the equipment. Excessive ... Read More

2012年3月28日 — Autoclave Air Detectors in Sterilization ProcessesWhat is an air detector?An air detector is a device commonly fitted to autoclaves processing ... Read More

1.38 An air-flow metering device used for testing air-detector performance and chamber integrity should be fitted to the test port on the side of the sterilizer, ... Read More

Verification of calibration of sterilizer instruments*. Chamber wall temperature test​. Air detector performance test for a small load. Air detector performance test for ... Read More