Error MessagesTroubleshooting | 合法醫療器材資訊網

1)ErrorNumberPossibleCause(s)Err1Thesystolicpressurewasdeterminedbutafterwardsthecuff...Bloodpressuremonitorwithmicrolifeaveragingmode.

6. ERROR MESSAGES/TROUBLESHOOTING

If an error occurs during a measurement, a corresponding error code

is displayed (Example: Error no. 1)

Error Number

Possible Cause(s)

Err 1

The systolic pressure was determined but afterwards the cuff pressure fell below 20

mmHg. This situation can occur if the tube becomes unplugged after the systolic blood

pressure has been measured. Check the tube connections and repeat the measure-

ment. Further possible cause: No pulse could be detected

Unnatural pressure impulses impair the result of the measurement. Cause: The arm was

Err 2

moved during the measurement. Remain still and repeat the measurement.

Err 3

Inflation of the cuff takes too long. The cuff is not correctly seated or the hose connec-

tion is not sealed. See section 5.3, fitting the cuff.

Err 5

The measured readings indicated an unacceptable difference between systolic and

...

Error MessagesTroubleshooting | 合法醫療器材資訊網

Microlife Premier Automatic Blood Pressure Monitor Manual Online: Error ... 1) Error Number Possible Cause(s) Err 1 The systolic pressure was determined but... Read More

Error MessagesMalfunctions | 合法醫療器材資訊網

Error No. Possible cause(s). ERR 1. The systolic pressure was determined but afterwards the cuff pressure fell below 20 mmHg. Read More

Error MessagesTroubleshooting | 合法醫療器材資訊網

1) Error Number Possible Cause(s) Err 1 The systolic pressure was determined but afterwards the cuff ... Blood pressure monitor with microlife averaging mode. Read More

Error Messages | 合法醫療器材資訊網

Microlife BP A3 Plus Manual Online: Error Messages. ... Description Potential cause and remedy «ERR 1» Signal too The pulse signals on the cuff are too weak. Read More

Question and answer list of problems with the O3 | 合法醫療器材資訊網

Q. The ABPM device did not take any blood pressure measurement after sending away the patient. ... A: Error 4 is a Software related error, there could be more than one reason for this: ... A: «Er 1»: The pulse signals on the cuff are too weak. Read More

B3Basic | 合法醫療器材資訊網

Microlife BP B3 Basic. Guarantee Card. Before each measurement. 1. 2. 3. Avoid eating ... This oscillometric blood pressure monitor is intended for measuring non-invasive ... interrupted and an error message, e.g. «Err 3», is displayed. Error. Read More

Microlife Vital Signs Alert | 合法醫療器材資訊網

1. Microlife VSA. EN. 1 ON/OFF Button. 2 Display. 3 Cuff socket. 4 Micro USB Port ( for charging only) ... arm blood pressure cuff to measure systolic and diastolic blood ... If an error occurs during the measurement, the measurement is. Read More

Automatic Blood Pressure Monitor Instruction Manual microlife ... | 合法醫療器材資訊網

IB BP 3BXO-A 3804_4 16/9/04 13:24 Page 1 ... The various components of the blood-pressure monitor. 4. Putting the ... Error messages/malfunctions. 7. Read More

What does error 3 on my microlife blood pressure monitor ... | 合法醫療器材資訊網

Several of the CVS brand blood pressure monitors are made by MicroLife USA. For those models, the Error 3 indicates that you may have been ... Read More

Microlife BP Monitor | 合法醫療器材資訊網

2019年5月29日 — Err 1 -- the systolic pressure was determined but afterwards the cuff pressure fell below 20 mmHg, this situation can occur if the tube is unplugged ... Read More

相關資訊整理