Reinstalling The Reference Sensor And Biosensors ... | 合法醫療器材資訊網

SiemensRapidlab1200ManualOnline:reinstallingthereferencesensorand...TheSamplePathMaintenance-SiemensRapidlab1200Operator'sManual...IfyouhaveaRapidlab1260or1265system,replacethetest/blanksensorswith ...

5-24

7. Perform the cleaning cycle:

a. Select

b. Draw the 10% bleach solution into a syringe and insert the syringe into the sample

c. Select

d. When prompted, remove the syringe and select

8. Select

9. Select

1. Lift the front cover and then lift the measurement module door.

2. Push the spring-loaded latch to the right.

3. Grasp the tab on the test/blank reference sensor and pull the sensor up and out.

4. Align the top of the reference sensor with the sensor contact.

5. Snap the sensor into place.

6. If you have a Rapidlab 1260 or 1265 system, replace the test/blank sensors with the

Glucose and Lactate sensors.