Error MessagesMalfunctions | 合法醫療器材資訊網

movedduringthemeasurement(Artefact).ERR3.Inflationofthecufftakestoolong.Thecuffisnotcorrectlyseatedorthehoseconnectionis.notsealed.

Error messages/malfunctions

If an error occurs during a measurement, the measurement

is discontinued and a corresponding error code is displayed.

(Example Error no. 1)

Error No.

Possible cause(s)

ERR 1

The systolic pressure was determined but afterwards the cuff pressure fell below 20 mmHg.

This situation can occur, for example, if the tube becomes unplugged after the systolic blood

pressure has been measured. Further possible cause: No pulse has been detected.

ERR 2

Unnatural pressure impulses influence the measurement result. Reason: The arm was

moved during the measurement (Artefact).

ERR 3

Inflation of the cuff takes too long. The cuff is not correctly seated or the hose connection is

not sealed.

ERR 5

The measured readings indicated an unacceptable difference between systolic and diastolic

pressures. Take another reading following directions carefully...

Microlife BP Monitor | 合法醫療器材資訊網

What does error 3 on my microlife blood pressure monitor ... | 合法醫療器材資訊網

2009年6月28日 — Several of the CVS brand blood pressure monitors are made by MicroLife USA. For those models, the Error 3 indicates that you may have been ... Read More

What does error 3 on my microlife blood pressure monitor | 合法醫療器材資訊網

Several of the CVS brand blood pressure monitors are made by MicroLife USA. For those models, the Error 3 indicates that you may have been moving your arm ... Read More

microlife error 3 Questions & Answers (with Pictures) | 合法醫療器材資訊網

My blood pressure machine keeps giving me an error ... ...MicroLife USA. For those models, the Error 3 indicates that you may have been moving your arm while the ... Read More

error 3 blood pressure cuff Questions & Answers (with Pictures ... | 合法醫療器材資訊網

...error 3 it is a cvs brand Several of the CVS brand blood pressure monitors are made by MicroLife USA. For those models, the Error 3 indicates that you may ... Read More

blood pressure error 3 Questions & Answers (with Pictures ... | 合法醫療器材資訊網

...blood pressure monitors from Life Source, the error 3 means that the blood pressure cuff isn't inflating properly. The cuff could be incorrectly fastened or the ... Read More

Error Messages | 合法醫療器材資訊網

Microlife BP A3 Plus Manual Online: Error Messages. If an error occurs during the measurement, the measurement is interrupted and an error message, e.g. «ERR 3», ... The pressure in the cuff is too high (over. pressure. 300 mmHg) OR the pulse is ... Blood Read More

Error MessagesTroubleshooting | 合法醫療器材資訊網

Microlife Premier Automatic Blood Pressure Monitor Manual Online: Error ... 1) Error Number Possible Cause(s) Err 1 The systolic pressure was determined but... ... Err 3. is not sealed. See section 5.3, fitting the cuff. The measured readings ... Read More

Error MessagesMalfunctions | 合法醫療器材資訊網

moved during the measurement (Artefact). ERR 3. Inflation of the cuff takes too long. The cuff is not correctly seated or the hose connection is. not sealed. Read More

Question and answer list of problems with the O3 | 合法醫療器材資訊網

Q. The ABPM device did not take any blood pressure measurement after sending away the ... «Er 3»: An adequate pressure cannot be generated in the cuff. Read More

相關資訊整理